Skip to content
Lambeth Lock & Key Co.Request a visit
Open 24/7(226) 785-2980Call now
Person handling a lock cylinder at a workbench lined with cylinders, keys, small pin trays and blank key tags. — Commercial Rekeying, Lockwood Park

Commercial · Lockwood Park

Commercial Rekeying in Lockwood Park

The renovation is finished and the contractors have gone, along with the loaner keys they used for six weeks. Trades, delivery drivers and an inspector all came through, and the front door still answers to the key that was passed around the site.

Call now · open 24/7(226) 785-2980

Request a visit

In plain words

For most business doors, rekeying is the sensible middle path between doing nothing and buying new hardware. Commercial cylinders are built to be repinned many times, and a lever set, mortise lock or storefront cylinder in decent condition has years left in it. Rekeying keeps the finish, the door preparation and the handles you already have and changes only the small brass pins inside. Where a cylinder is worn, corroded by winter salt or too light for the room behind it, the locksmith says so and offers a replacement for that door alone; the rest are rekeyed to the new plan.

Sound familiar?

You have just signed the lease on a unit the previous tenant ran for a decade. The landlord handed over three keys, the back door wears a padlock nobody can open, and nobody can say how many front-door keys are still out there.

How the visit goes

Commercial Rekeying · Lockwood Park

How the visit goes

Technician in a cap and glasses holding a small key fob beside the dashboard of a black motorcycle in a garage. — Lockwood Park
  1. 1

    Which doors are the landlord's

    In a plaza, an office building or a multi-tenant industrial unit, some doors on your floor plan are not yours to rekey. Corridor doors, electrical and mechanical rooms, shared loading doors and the building's fire exits usually sit on the landlord's master system, and a suite entrance may be required to accept the landlord's key as well as yours. The locksmith sorts the openings into two columns before starting: those the lease puts under your control, which get the new plan, and those that stay as they are or need the property manager's say-so. Where a suite door must accept both a tenant key and the building master, it is pinned to do exactly that.

  2. 2

    Retiring the old keys

    The job is finished when the old keys are proven dead, not when the new ones work. At every rekeyed opening the locksmith tries a sample of the old keys, including the master if one existed, and confirms that each one enters the keyway and turns nothing. The collected old keys are then cut through with snips in front of the manager and can be handed back as scrap or taken away. Any door deliberately left on its original key is written on the chart in plain words so nobody assumes it changed. That last check is what turns a day of brass work into a genuine reset of who can open the business.

  3. 3

    Exits that still open the way they must

    Rekeying changes who can come in; it never changes how people get out. Every exit door and every door on the way to one is left opening from the inside with a single motion and no key. On a door with a panic bar, the outside cylinder simply controls entry, and the bar keeps working exactly as before. Once the locksmith has finished, walk the exit routes yourself, push each bar and turn each thumb-turn, and make that walk a habit at the start of every season so a new deadbolt or a helpful padlock never creeps onto an exit.

In the van

  • Master pins
  • Standard and restricted key blanks
  • Dry graphite or PTFE lubricant
  • Mortise cylinder set screws and cams
  • Key gauge and decoder

What affects the quote

  1. 1

    How many keys are cut

    Each key cut to code and stamped is counted into the quote. Two per door group for a small shop and forty for a warehouse shift are different numbers.

  2. 2

    Distance to the premises

    Travel to the site is part of the call-out, and a unit in a downtown plaza and one at the end of a rural industrial road are different trips.

  3. 3

    After-hours or split visits

    Work done after closing, before opening or split across two visits to suit trading hours costs the same amount as a single daytime block. The exact figure is confirmed on site once the number of cylinders and the keying plan are known.

Same fees day, night or weekend.

Have it ready

Before you call · 0 / 3

(226) 785-2980

Commercial Rekeying: questions

Advice · (226) 785-2980

What information should I have ready before the locksmith arrives?

A list of the doors and other locks you want included, a copy of the lease or the property manager's contact, every existing key you can find, and a rough idea of who needs to open what. Note which doors, if any, are interchangeable cores and where the control key is. Knowing your quiet hours and who opens up in the morning helps the locksmith plan the order of work and the key handover.

We lost a master key. Does the whole building need doing?

Only the cylinders that master opened, which the keying chart identifies. If the lost key was the top master, that is every lock in the system; if it was a departmental master, it is that department's doors. Where no chart exists, the locksmith reads the cylinders first to establish what the key reached. The remaining doors, and any keys that never opened them, are left exactly as they are.

Does stamping keys 'do not duplicate' stop people copying them?

Not reliably. The stamp is a request, and any key on a standard blank can be copied by anyone with the blank and a machine. What does work is controlling the blank itself through a restricted keyway, or controlling access to the lock through interchangeable cores and a tight register. Stamping still has a place: a serial code on each key, instead of the business name, lets you track it without telling a finder where it fits.

Commercial Rekeying near you

Middlesex, Ontario

Lockwood Park information

Town
Lockwood Park, Middlesex, Ontario
In business
15 years
Hours
Open 24/7 · nights, weekends and holidays, same fees
Visits
On-site assessment preferred. Request a visit or call.

What the census means at the door

42%

Homes of every age. About 42% of homes in Middlesex Centre were built in 1980 or earlier, according to the 2021 Census.

Where housing ages are mixed, some homes have never had a deadbolt and others have two. The visit starts with a look at what is already there, and the recommendation might be adding a lock on one house and simply tuning it on the next.

91%

Mostly houses. Single-detached houses make up about 91% of homes in Middlesex Centre (2021 Census).

Where most homes are detached houses, each one has several exterior doors: front, side, back, garage entry, sometimes a walkout. Getting them all onto one key is the most requested job, and it usually takes a single visit.

Source: Statistics Canada, 2021 Census of Population

Open Lockwood Park in Google Maps

Open 24/7

Request a visit

The renovation is finished and the contractors have gone, along with the loaner keys they used for six weeks.

Call now · open 24/7(226) 785-2980
  • On-site assessment preferred
  • Same fees day, night or weekend
  • 15 years in business